Installation of Carving Cornices
 1. Make marking on cornices for corner joint. |
 2. Marked on the wall and ceiling using the cornices to prepare for corner joints. |
 3. Saw at the marked point of the cornice. |
 4. Apply adhesive along the edges at the back of cornices as wall as to the mating surfaces for joints. |
 5. Using Pressure gun for nailing. |
 6. Adjust the joint for perfect match. |
 7. Ensure proper alignment on joints before nailing. |
 8. Apply filler to fill up gaps. |
 9. Use sand paper to smooth the surface. |
 10. Wipe off excess filler. |
<< Back
